Kinect QD M-LOK Single 7-Slot Rail

Although revolutionary, Kinect is quite simple in its operation.  There are two spring-loaded wedges in the base of the Kinect mount.  When you press the accessory rail section down in the M-LOK slot, two tiny deployment triggers get pressed against the rail firing the wedges into place.  There is nothing more frustrating than fiddling with an Allen wrench to get your accessories on and off your weapon with traditional modular rail sections.  This changes the whole dynamic of the M-LOK system and really makes every accessory truly removable with the ability to mount it in a second when needed.

Features:

• Easy Quick Detach
• Compatible with any M-LOK rail system
• Black Anodized
• Length: 3.73" - use with two M-LOK section
• Width: 0.82" (20.9 mm)
• Height: (over M-LOK) 0.41" (10.5 mm)
• Made in the USA

*Please note:  The Kinect system was designed and manufactured to the original specifications set by Magpul Industries for a rail thickness of 0.080" and 0.125" thick.  The current specifications for M-LOK are a thickness of 0.080" to 0.150" as many of the polymer M-LOK products on the market have to be thicker to support glass filled polymer rail systems.  Therefore KDG does not suggest, nor guarantee the KINECT product will work on these polymer products. Polymer rails can be modified to work, but the Kinect system was intended for use on precision machined aluminum rails within the specification of 0.080" - 0.125" overall thickness.  With the variable tolerances that polymer parts are capable of, it is not suggested you buy Kinect QD M-LOK mounts unless you are sure the rail is within the specifications, or you are able to modify your rail to fit the Kinect system.  Measure the thickness of your polymer rails before ordering.

**The Kinect Pieces are made fully assembled for the factory and are not intended to be disassembled by the end user.  Because these are mechanical items, all Kinect pieces are tested multiple times at the factory to insure they work properly and are securely mounted onto M-LOK rails.  So if you see marks of use on your new Kinect pieces, do not worry, that is the factory test marks.  Since the M-LOK system has varying tolerances, each Kinect pieces may attach differently to each different manufacturers rail.  Kinect was designed to work with the full range of M-LOK accessories on the market.