This is a high-quality ejector and extractor kit for all Savage centerfire models based on the 10/110 action. Made from the best materials with the best finishes applied, this kit may resolve extraction and/or ejection issues that can occur with the OEM setup. There are nine separate components in this kit which incorporate all the parts contained within the Savage bolt head. Included are two ejectors which have slightly different diameters to account for dimensional variations between the factory and aftermarket bolt heads. Also included are two different weight springs for both the extractor and ejector. These extra inclusions maximize the likelihood of the assembled bolt head functioning for all vintages and calibers of Savage rifles. The extractor design is compatible with all factory chamberings, including cartridges with 0.390" rim diameters (204 Ruger, .222 Rem, .223 Rem, etc).
Features:
- Extractor machined from 17-4 stainless steel and to tighter tolerances than the OEM version
- Extractor Detent Ball made from 304 stainless steel and oversized
- Extractor Spring (x2) made from zinc-plated piano wire, one standard strength and one extra strength
- Ejector (0.0988" diameter) machined from 17-4 stainless steel with a TiN (PVD) coating
- Ejector (0.1" diameter) machined from 17-4 stainless steel, supplied as machined (silver color)
- Ejector Retaining Pin made from 316 stainless steel
- Ejector Spring (x2) made from zinc-plated piano wire, one standard strength and one extra strength
Does not work with the Savage Axis.
Installation instructions here. (*images in the installation instructions are the previous kit but installation is the same)