Materials and construction are top notch! Love the fact that it has eight shell holders, where most others have less. Also, I was concerned that it would not fit my tactical style stock, which is very tall in the butt. The additional, extra long strap made this a non-issue. This product far exceeded my expectations. Thank you!

Great cheek pad made by Tac Opps. Holds cheek tight on stock for those low sub MOA groups. A must for accurate shooting. Also Lisa sent extra long straps in case you need them. She is the best!!!!

I purchased a tacops left hand ammo cheek pad some months ago and would like to provide some feedback on the service and product-workmanship is exceptional-worth every penny and then some.-not sure how such a well made product made in northamerica can be sold for so low a price!-service was exceptional-all emails and questions answered promptly and received the product quickly-now for the really interesting part-shooting a rem 700 tactical in 308-factory houge stock, with my match load of 40.5gr 4064 lapua brass, win prim and sierra 168hpbt- best was around .5inch groups, after started using rifle with tac ops cheek pad, I can now do in .3's, best .330--only explanation is improved cheek weld, everything else the same and this is repeatable-thank you for a fine product-job well done!

Its a very well made product. Enough space for essentials, i.e. tools, pen, rounds. Shipping was extremely fast. 3 days from ordering. Adjusts perfectly. Extremely pleased with this product. Thanks Tacworks!

At first I could not believe it would fit my stock. Then I realized the straps were adjustable at both ends. I was able to put an adjustable wrench, screwdriver with multiple bits, toothbrush, and a Boresnake in the pouch. I was surprised it was not big enough for a Mildot Master but I just slid between the stock and the pack. I was very pleased with the entire setup. I also added 1/2 inches of foam underneath to get my eye relief perfect on a B&C Medalist A2.

This is a nice cheekpad. I have it attached to a Remington 700 Varmint with a Bell and Carlson A2 Medalist stock.
You can adjust all the straps to fit any stock and it's very comfortable for shooting. Highly Recommended.

This stock pack works very well. It's full of adjustability for any size or shape stock and I use the pouch for my dope card, pen, and ear plugs. All around great product.

yes i put this on my bell and carlson m40 stock and it fit great and feels awesome its soft on the cheek, and matches the stock perfectly would recommend it to anyone.

This is a must for the big guys. I needed to know what the exact length of pull would be with this added on the stock. Once again Lisa gave me a call back with what i needed to know. You couldn't ask for better service than what they have given me.

Nice upgrade for the Choate stock. I have one mounted to my Remington tactical 700. Allows for vertical and horizontal adjustments. Also, the plates are made of very durable material. This upgrade is worth the while (in my opinion) for the serious long-range shooter.

Nice lightweight extended bolt handle. Mine installed in the bolt dovetail without any stoning. I did need to flatten the knob for a flush fit against the shoulder on the titanium handle, but it was an easy job with a diamond stone.
Great bolt handle, would buy again.

Fits right on perfectly! This greatly reduced the force necessary to lift the bolt handle, making the bolt action feel much much smoother. I enjoy the large ball over the stock small ball Savage bolt. The tactical bolt was not in stock at the time of ordering so I went with the BT style instead, I'm glad I chose the BT; the ball shape seems very comfortable. I highly recommend picking this up.

outstanding unit.matched perfectly to my mod. 70 win. 300 winmag. all adjustments available. mine is mated to my specs. perfectly. it has improved my shooting.

Lisa this is my 2nd Review after taking it to the range. Outstanding stock for the price, I also added a Harris Bi-pod, overall i have a new inexpensive platform with my Savage Model 11, now to look for an inexpensive model for the rifle.

This is my second purchase from tactical works, and I am very pleased with the service I've received and the fast shipping, the products are always exact and any concerns with install is quickly addressed.

Advantages: Drop in install quick and easy

Disadvantages: None

The Choate Stock is a very good upgrade to my 6.5 Creedmoor 24” HB by Howa. The OEM Stock was fine for normal operations but had to much flex in the for-end. I will say it had no problem with a Quarter MOA @100 - 200 yrds. Also Half MOA 300 - 400, well built Barreled Receiver by Howa. The Choate Stock with acquired torque specs went on with no problem, Start 20 Inch Lbs to 60 Inch Lbs with 5 Inch Lb increments. This was true in the start, but ended up with 85 Inch Lbs due to the bullet spread walking up the target. All trial and error but no complaints, Now if you are a tall person with LONG arms I will suggest you acquire the extension to the Butt stock (Comfort). In regards to your cheek weld make sure you acquire the riser for the stock combing. You will make note of this very fast once you change your stock over to the Choate, my OEM stock I created a built up riser for correct eye alignment in my scope. This is a great buy for that person who enjoys real good shooting and finding your Zone. Those who wonder about the weight, just fine it was just about were I had my OEM stock with weight added for balance. The rail on the bottom is a fine piece, this not only allows you to add your Bipod - with a couple of turns you can loosen you Bipod and slide back for down angled trajectory and still be in your Zone. Hope this helps!!!

Advantages: Balance Comfort

Disadvantages: None to Date

Looks and fills very well built, fits my 260 just perfect!

Very impressed! dropped right in my H-S Precision stock. I'm ordering another one to avoid fighting top loading around optics.

completely transformed the rifle...Christiansen Arms MPR...WORTH every penny.

Excellent product, perfect fit. Very pleased!

Very well done unit

Advantages: Extra rounds at finger tips, rounds protected from impact

Disadvantages: None

This is a superior unit. The bottom plate is a superior grade of aircraft aluminum, and the bow of the trigger guard is titanium. It does not have the squared tactical profile common to some bottom metal for Tikkas, but rather, it keeps the more graceful, rounded profile of the factory plastic. One of the most exciting aspects of this replacement is that new action screws and ferrules were included so the new bottom metal’s rigidity will be complimented by pillar bedding. The cost is among the lowest of any replacement bottom metal for the t3x. I believe it represents an excellent value and an upgrade to function, accuracy, and aesthetic for your Tikka.

I think this is the best enhancement available for the money for a rifle with everything otherwise well-designed and well-made.

5 stars!

Advantages: Quality, function, appearance.

Disadvantages: None.

Excellent quality/construction. Highly recommended for long range tactical/range work! As this items description implies, the imitation versions are not even worth purchasing, get this one ~ the original..

I am very pleased with this product,
the quailty is first rate and I am impressed with the ajustability of this design. I can put it on just about any longarm I want with relative ease. I have a combat knife in the side pocket and am very pleased with how tight the ammo loops fit 7.62x51 ammo,I am not going lose any ammo! Tactical works customer service is amazing! They shipped me my order in half the time their competitors did. I am going to buy from them again.

These mags work great in a AICS chassis. Excellent product.

Advantages: They work

Disadvantages: The ridge on the back of the mag partially block the mag release lever. Five minutes with a file fixes it.