Home :: Remington :: Tactical Bolt Knobs :: TacOps Oversized Tactical Bolt Knob

TacOps Oversized Tactical Bolt Knob

TacOps Oversized Tactical Bolt Knob
TacOps Oversized Bolt Knob
 
(2 reviews)  

SKU
TacOpsTBK
Quantity in stock
5 item(s) available
Weight
6.00 oz
Your price:
$41.00
Quantity (5 available)
Oversize Knob For Fast, Positive Action Cycling; Installs with or without adapter stud for desired look & feel.
 
2-piece, bolt knob conversion gives the tactical rifle builder the flexibility to extend the overall bolt handle length for maximum leverage, or to maintain near factory length for minimal bulk or weight increase.
 
Increases overall bolt handle length by up to 1" for added leverage and to prevent the trigger finger from hitting the bolt knob when shouldering the rifle.
 
For minimal length increase, turn and thread the bolt handle shank for 5/16"-18 tpi and screw-on the knob. Oversize, tapered knob is machined from 6061 T-6 aluminum for maximum strength with minimal weight increase. Available with Hard Anodized, semi-gloss.
 
Installation is fast and easy – simply cut off the factory bolt knob, drill the cut end of the bolt handle shank, TIG weld or silver solder the pre-threaded adapter stud in place, and screw-on the tactical knob.
Angle Cosine Indicator "Mil Spec" by Flatline Ops
Angle Cosine Indicator "Mil Spec" by Flatline Ops
$162.99
Tactical Evolution Chassis for Savage Short Action Stagger Feed by XLR Industries
$790.00
Magpul PRS Extended Rubber Butt-Pad
Magpul PRS Extended Rubber Butt-Pad
$14.20
Ambi Sling Coyote by Crosstac
Ambi Sling Coyote by Crosstac
$39.99
Butler Creek Flip Open Eyepiece Cover #16
Butler Creek Flip Open Eyepiece Cover #16
$9.99
FTW Rear Bag Coyote Brown by Rifles Only
FTW Rear Bag Coyote Brown by Rifles Only
$25.00
Coyote Tan Shooting Bag
Coyote Tan Shooting Bag
$8.50
Remington 700 Badger Ordnance Short Action Tactical Scope Mount "0" M.O.A.
$150.00
Average customer rating:
 
(2 reviews)  



2 Most useful customer reviews (see all reviews):
shadow083507
Amazing how much easier it is to work the bolt. Being left handed, the small factory bolt knob was ackward working the action. With the oversized knob, it takes much less stress on my wrist and very smooth. I cut the factory knob off with a hacksaw, faced the cut with a file and drilled the hole for the stud using a drill press & vise. I did have to have a friend TIG weld stud in place. Very minor cleanup of weld and spray paint. Instructions in box are clear and straight forward. Worth every dime to me.
Loading...Was the above review useful to you? Yes (0) / No (0)
Tommy Dinkle
I could ramble on about the service I experienced when I purchased an over sized bolt knob from Tac Ops, but the facts are I ordered the product on the 17th after hours had a response immediately, and received my part on the 20th. Great product and great hassle free service. Thanks.
Loading...Was the above review useful to you? Yes (0) / No (0)