The Choate Stock is a very good upgrade to my 6.5 Creedmoor 24” HB by Howa. The OEM Stock was fine for normal operations but had to much flex in the for-end. I will say it had no problem with a Quarter MOA @100 - 200 yrds. Also Half MOA 300 - 400, well built Barreled Receiver by Howa. The Choate Stock with acquired torque specs went on with no problem, Start 20 Inch Lbs to 60 Inch Lbs with 5 Inch Lb increments. This was true in the start, but ended up with 85 Inch Lbs due to the bullet spread walking up the target. All trial and error but no complaints, Now if you are a tall person with LONG arms I will suggest you acquire the extension to the Butt stock (Comfort). In regards to your cheek weld make sure you acquire the riser for the stock combing. You will make note of this very fast once you change your stock over to the Choate, my OEM stock I created a built up riser for correct eye alignment in my scope. This is a great buy for that person who enjoys real good shooting and find...