; !-- This site is converting visitors into subscribers and customers with OptinMonster - https://optinmonster.com -->
Home :: Lithgow :: Lithgow LA102 DBM for AICS Magazines by Lumley Arms

Lithgow LA102 DBM for AICS Magazines by Lumley Arms

Lithgow LA102 DBM for AICS Magazines by Lumley Arms
Lithgow LA102 DBM for AICS Magazines by Lumley Lithgow LA102 DBM for AICS Magazines by Lumley Lithgow LA102 DBM for AICS Magazines by Lumley Lithgow LA102 DBM for AICS Magazines by Lumley Lithgow LA102 DBM for AICS Magazines by Lumley Lithgow LA102 DBM for AICS Magazines by Lumley Lithgow LA102 DBM for AICS Magazines by Lumley Lithgow LA102 DBM for AICS Magazines by Lumley Lithgow LA102 DBM for AICS Magazines by Lumley
 
(0 reviews)  

SKU
LA102-AICS-SA
Quantity in stock
2 item(s) available
Weight
10.00 oz
Your price:
$169.00
Quantity (2 available)

The DBM for the Lithgow LA102 by Lumley is a durable replacement that accepts high-quality AICS pattern magazines. This DBM eliminates the last major plastic component on the factory laminate and walnut stocks that utilize the Tikka T3/T3x pattern magazines. It also provides an exceptionally rigid platform for pillar and/or fully epoxy bedding to chase accuracy improvements on these already fantastically accurate rifles. The trigger guard and body are high-grade 7075-T6 which are then finished to match the colors of the original Cerakote metalwork from Lithgow Arms. The magazine release lever is ambidextrous and is either 4140 QPQ nitrided steel (black color option) or 316 stainless steel (titanium color option). All minor components including the lever roll pin and lever coil spring are made from stainless steel. Even with prolonged use in extreme environments the Lumley DBM will not fail, corrode, or degrade in any way. It is exceptionally light and instantly permits the use of a wide range of 5 and 10-round steel magazines in the AICS pattern.

Stock Compatibility:

  • Fits factory Walnut and Laminate stocks with minor inletting on each side of the magazine well
  • Drop-in fit for all Bolly Aviation (Precision Defence Industries) carbon fiber stocks
  • Will not fit factory synthetic stocks and not compatible with any known chassis systems

Features:

  • High-grade aerospace materials minimizing weight but maximizing durability
  • Accepts all short action AICS pattern magazines (223/308/WSM types)
  • Can be used with AIAW magazines (milling of action required)
  • Design follows the lines of the original factory plastic triggerguard resulting in a seamless fit to all stocks
  • Triggerguard and body of the DBM is machined from high-grade 7075-T6 aluminum alloy
  • Titanium color DBM has an ambidextrous magazine release lever machined from 316 stainless steel
  • Black color DBM has an ambidextrous magazine release lever machined from 4140 steel (QPQ)
  • Titanium color DBM has Cerakote H Series Titanium H-170 applied to the triggerguard and body
  • Black color DBM is hard-coat anodized Type 3 (MIL-A-8625) for both triggerguard and body
  • All other components are stainless steel (either 304 or 316 grades)
  • Reuses the original factory action screws, no bedding pillars or action screws are supplied
  • Precision turned stainless steel shims included to account for variations between different stocks and magazine feedlips.

Fitting Guide:

The Lumley DBM follows the factory inlet 100% however due to the AICS magazines being wider, a step inside the stock needs to be ground down. This is ideally done in a milling machine but is also an easy 10-minute job with a Dremel-type tool or a little longer with a rasp. No special tools are needed and this area is not visible once the rifle is reassembled. Aftermarket stocks such as those from Bolly Aviation (Precision Defence Industries) do not require any inletting and have been milled to suit the wider magazine well required for AICS pattern magazines. Please note that action screws and bedding pillars are not included as the DBM is designed to reuse the original Lithgow action screws that came with your rifle. Due to variations in tolerances between different rifles and the different stock and magazine options available on the market, stainless steel shims are included which allow fine tuning of the DBM-to-action spacing to achieve a perfect fit for your particular rifle.

HARRIS BIPOD HBRM 6"-9" (FIXED)
$80.00
Scout 30mm Accu/Level by Flatline Ops
$79.99
The Carbine Sling OD Green by Rifles Only
$89.95
Miniature Torque Limiter 45 inch lbs by Fix It Sticks
$32.00
Tikka T3 Carbon Fiber Bolt Handle Left Hand by Lumley Arms
$59.00
Savage Bolt Baffle / Bolt Stop
$8.00
There have been no reviews