Savage SA "Drop Box Mag" Tactical Stock by Choate

This stock can take AICS style mags if you have a gunsmith do the work. 1st, the cutout for the trigger guard is a little narrow and will need to be widened. Most importantly, there are aluminum stop plates that come down from the bedding block that need to be shortened. supply a accu-mag and a couple of rounds loaded without powder and primers, and the gunsmith can mill down those stop plates to the correct length. Lastly, go to a hardware store and get some various lengths of SS socket head bolts(1/4 X 28) because the factory bolts are likely to be too short, as was the case with mine. Lastly, have your scope base and action bedded while your at it for accuracy.