Home :: Chassis Systems :: Modular Driven Technologies (MDT) :: Skeleton Carbine Stock by MDT

Skeleton Carbine Stock by MDT

Skeleton Carbine Stock by MDT
Skeleton Carbine Stock Skeleton Carbine Stock Skeleton Carbine Stock Skeleton Carbine Stock Skeleton Carbine Stock Skeleton Carbine Stock Skeleton Carbine Stock Skeleton Carbine Stock Skeleton Carbine Stock Compatiblity Chart Skeleton Carbine Stock LOP Chart Skeleton Carbine Stock
 
(0 reviews)  

SKU
MDT-SCS1
Quantity in stock
1 item(s) available
Weight
44.00 oz
Your price:
$249.99
Choose Length:
Quantity (1 available)

The Skeleton Carbine Stock was designed to allow maximum adjustability while minimizing weight. The adjustability allows each shooter to optimize superior ergonomics for multiple shooting positions. The weight has been minimized by skeletonization while retaining the strength of the stock.

The Body 

The SCS has 3 QD attachment points for multiple carrying choices. One on each side and one on the bottom. There is also a provision on the bottom of the stock to allow for the attachment of a picatinny rail.

The user is able to finely adjust the LOP by using the wheel mechanism located on the body of the SCT. Length of Pull can be locked into position by tightening the lower bolt. The angle of the stock can also be adjusted by loosening the top two screws on the body. This allows the body to align with the buffer tube by using the scribe mark down the buffer tube and the offset scribe mark on the SCS body.

Crafted in 6061 Aluminum with Cerakote.

The Carriage 

The carriage allows the user to finely adjust the cheek riser height through adjustment of the wheel. The position of the cheek riser is able to be locked in by tightening the set screws on the side of the carriage. The carriage also allows the user to adjust the position and angle of the carriage itself. This is done by loosening the bolts beside the wheel.

Foam Cheek Guard

A soft foam guard has been placed on the SCS to allow for use with low optics. This foam guard provides comfort against the elements. The foam guard position is adjusted by moving it horizontally along the buffer tube.

The Buttpad

The buttpad on the SCS can be adjusted horizontally, vertically, and angularly. By loosening the setscrew on the rear portion of the buttpad, the buttpad can be adjusted vertically. Once the buttpad has been moved up, two screws will be revealed. to adjust the angle of the buttpad, or move it in the horizontal plane, these screws must be loosened.

The SCS must be used with a custom MDT buffer tube and standard castle nut. This MDT buffer tube has a scribe mark down the center to allow the shooter to zero the angle of the SCS if they wish. On the body of the SCS there is another machined marking to further allow the shooter to precisely angle their stock to suit their needs.

Firearm Compatibility

MDT offers various buffer tube lengths to allow shooters to choose their LOP. To use these buffer tubes with AR15/AR10 buffer system, one or more spacers will be included with your purchase. The possible buffer tube configurations and compatibility chart are detailed below:

1. When using 8.75" long SCS, an AR15 carbine buffer tube system can be used as it has the internal length of an AR14 carbine buffer tube. AR10 carbine buffer tube systems and AR10/AR15 rifle buffer tube systems are not compatible

2. When using the 9.75" or 10.75" long SCS, an AR10 Carbine Buffer Tube System can be used, as it has the same internal length oas an AR10 Carbine Buffer Tube. An AR15 Carbine Buffer Tube System can be used with the use of a 0.625" spacer inserted into the buffer tube

3. When using the 11.75" long SCS, an AR15/AR10 Rifle Buffer Tube System can be used, as it has the same internal length as an AR15/AR10 Rifle BUffer Tube. An AR15 Carbine Buffer Tube System can be used with the 2.3" spacer. An AR10 Carbine Buffer Tube System can be used with the 1.7" spacer inserted into the buffer tube.

***See the color graph in the detailed images

Length of Pull

The buffer tube comes in various lengths to allow for proper LOP for any rifle, while maintaining the correct internal length of an AR15 buffer system. The various lengths in relation to the Length of Pull (LOP) with an MDT chassis system are outlined in the table below.  

For the ESS Chassis, the length includes the required adapter.

***See inches/metric chart in the detailed images

Weight

The SCS with cheekpeice weighs 1.91 - 1.96 lbs depending on the length of the buffer tube used, without spacers.

 NOTE: 

To clean or inspect the bore of a bolt action rifle equipped with the adjustable SCS, you will need to loosen and rotate the cheekpiece carriage down and out of the way.

For all AR15/AR10 applications, you must use the non-adjustable version of the SCS unless you have a side-charger handle.

Modular Maintenance Block Kit by Crosstac
Modular Maintenance Block Kit by Crosstac
$128.99
Skeleton Rifle Stock V4 FDE by MDT
Skeleton Rifle Stock V4 FDE by MDT
$289.99
Savage Tactical Carbon Fiber Bolt Handle Left Hand
Savage Tactical Carbon Fiber Bolt Handle Left Hand
$52.00
Kinect QD M-LOK Single 3-Slot Rail
Kinect QD M-LOK Single 3-Slot Rail
$46.49
Slideboot Medium/Compact Frame Black
Slideboot Medium/Compact Frame Black
$19.99
Badger Ordnance Maximized Recoil Lug - Stainless Steel
Badger Ordnance Maximized Recoil Lug - Stainless Steel
$27.95
Ultralight Saddle Bag Coyote by Crosstac
Ultralight Saddle Bag Coyote by Crosstac
$32.19
Tactical Works PVC patch - Tan
Tactical Works PVC patch - Tan
$5.95
Element Chassis for Remington 700 Long Action by XLR Industries
Element Chassis for Remington 700 Long Action by XLR Industries
$425.00
There have been no reviews