Angle Mounted Adjustable Bag Rider by Long Shot Precision

The Adjustable Bag Rider (ABR) is made locally and assembled in the USA. Made out of the highest quality American aluminum, CNC made and anodized for superior wear resistance, the ABR is made to last and weighs less than a pound. The custom dowels come in either hardened alloy steel or stainless steel and ride in linear bearings for consistent smooth operation. A custom-designed SS thumb wheel rides in two Delrin thrust washer that are known for their strength and creep resistance. The ABR replaces the need for expensive, heavy, and bulky adjustable front rests and wobbly monopods. It is the only bolt-on enhancement that provides vertical adjustment while providing horizontal stability without requiring positional body changes. Installation is simple, quick, and you never need to remove it.

The Angle Mounted Adjustable Bag Rider is designed to bolt directly to the bottom of the MDT stocks (and some Savages) with supplied bolts. There must be a mounting SLOT in the bottom of your stock. Two bottom rider options are available - the V and the ELR. The ELR base is 0.850" wide.

There are four mounting holes providing options to cover stock variations. Select the two mounting holes farthest from each other. A 5/32 hex wrench will be needed (not provided). The stock must have a mounting SLOT in the bottom. Older MDT stock models have two holes and will need machining to mount the 1/4" bolts. The ABR will NOT fit the Composite Carbine Stock. Does NOT fit the NEW ACC Elite with lower support bar that attaches to the grip, even if you remove the bar.

Direct Bolt-on Applications:

• ACC Non-folding - Long Dowels
• ACC Folding - Short Dowels
• ESS Non-folding - Long Dowels  
• ESS Folding - Short Dowels 
• SRS (Skeleton Rifle Stock) Standard - Short Dowels 
• SCS (Skeleton Carbine Stock) - Long Dowels (The shorter tube length may require the Folding Stock Adapter to increase LOP - or a longer tube) 
• SCS-Lite - Long Dowels (The shorter tube length may require the Folding Stock Adapter to increase LOP - or a longer tube)
• Savage Impulse Elite Precision - Long Dowels
• Colt CBX - Long Dowels
• Faxon FX7 - Short Dowels
• Need help deciding which ABR works for you? Just give us a call: 970-672-0765.

Features:

• CNC'd American 6061 Aluminum
• Class II Anodizing
• Clamp to lower Picatinny rail
• Unequaled ease in vertical adjustment in micro intervals
• No need to purchase expensive and/or heavy front rests
• Rock solid horizontal stability - no wobble
• Reduced load development time
• No more squeezing a bag - reduces vertical dispersion
• Faster follow up shots
• Straight tracking
• Includes Rail Clamp and 10-32 bolts - torque to 18 inch pounds 
• Weighs less than 16 ounces

Caliber Restrictions: 

• .338 and smaller will use the standard dowels
• .33XC and larger need the Hardened Dowels 
• PRS use requires Hardened Dowels

Modification required:

Savage B22 & B17 - Long Dowels - Minor modifications are necessary as M-LOK nuts and bolts will be required and the counter sinking of the heads on the bottom of the ABR will be required for a flush mount (see picture).

The two lower riders (ELR bottom or V bottom) are designed to provide optimal performance when used with a rear bag with ears. No need for positional changes to the rifle and body which cause point of impact inconsistencies. Say goodbye to the mound of expensive and heavy equipment you take to the range. Whether you plan to go to the bench or want to take a shot in the field you are guaranteed to have previously unattainable stability and micro-adjustment with you at all times!

The ABR is designed to work with a rear bag and any bag or sand sock can be used - but a bag with ears works best. Bags with bunny ears allow full access to the thumb wheel at all times. If a heavy leather bag is used and there is space in between the ears and the rider the groups will be horizontal. If there is a space, remove the ABR from the bag and, pushing down with your thumb on the top of the ears to shrink the space between the ears. if all space cannot be removed a shim can be tested. For example, lay a piece of leather across the top of the ears and push the ABR down on top of it. 

Long Shot Precision (LSP) has worked closely with the Protecktor Model company to develop the "round back" rear shooting bags. These bags have been collaboratively designed for use with the ABR to maximize clearance from the thumb wheel to the front of the bag ear. We recommend you call Protektor Model and let them know which ABR you've purchased and the height you need and they will guide you to the best Round Back Bag. 

**Do NOT lower the rider past the dowels being level with the top of the ABR. Please note this product does NOT fit anything other than the MDT with a mounting slot.

 Non-Affiliation Disclaimer: LSP is not affiliated, associated, authorized, endorsed by, or in any way officially connected with the Modular Driven Technologies (MDT) brand.