Atlas Bipod CAL Gen2

The CAL (Cant and Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature. 

The BT65 mounts directly to any 1913 style Picatinny rails via a low profile two screw clamp assembly. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. B&T chose to support a legend in the shooting sports by using the original KMW "Pod-Loc". 

With the CAL bipod mounted to your rifle, you will be able to lock and unlock the canting motion by rotating the Pod-Loc lever. Turn clockwise to lock and counterclockwise to unlock. The Pod-Loc lever position can be adjusted for positioning by pulling the lever directly away from the body of the CAL and rotating to desired position. This positioning can be repeated until optimal position is achieved.

• Construction from T6061 Aluminum, Hard Anodized Black
• Stainless steel springs and fasteners
• Heat Treated Stainless Steel Leg position components that provide positions at 0, 45, 90, 135, and 180
• Height range approximately 4.75 - 9.0"
• 15 degrees +/- of preloaded Cant
• Non-Rotating Legs: outer leg does not rotate around inner leg
• Strengthened Leg Boss
• Footprint 9.75 - 13"
• Optional 3" leg extensions to increase height available
• Standard soft durable Rubber feet that are suitable for many surfaces.
• Optional interchangeable Ski, Cleat, and Spiked feet can be swapped in the field with the press of a ball plunger with a bullet tip.
• Estimated weight of 12.87 ounces
• Made in the USA