Savage Improved Extractor Ejector Kit

I purchased 2 of your Savage Extractor/Ejector kits. One for a M10 .308 and the other for a M110 6.5 CM. Both are rifles i shoot in PRS style matches as well as hunting.
The kits improved the mechanical function on both rifles 100%.

Advantages: Better extraction and ejection.

The best upgrade for your savage. It’s especially helpful with shorter cartridges like 300 BLK.

Advantages: Better extraction and ejection

Disadvantages: None

I was growing leary of my extractor not ejecting my .308 cases properly. The Extractor would let go prematurely, dropping the empty case onto the top of the magazine.

Well, this kit is the solution. Extraction and ejection is very positive and the brass gets kicked out clear of the ejection port. With authority. This kit works.

Advantages: Ejection is now completely reliable.

Disadvantages: None.

Very nice item,much better than o.e.m. parts . Easy to follow video instruction,very quick to ship. Well worth the money.

Advantages: Very well made

Disadvantages: none

Easy to install, directions are clear. Works like a dream.

Advantages: Better extraction than the original Savage extractor, works really well.

Disadvantages: If you are using with Aluminum Snap Caps, the extractor will cut through the aluminum.

Completely fixed the problem of spent shells not being fully ejected. I’m very pleased with the results.

I installed this in a Savage I've been shooting for over 20 years. I had the factory extractor parts replaced under warranty, and have replaced them a couple of times since, but it never really helped. The weak extraction has been my only complaint with this rifle. I took it out for the first time after installing this yesterday, and was amazed. I actually like my Savage again! Thanks!

Advantages: Easy to install, works great

I’m sure anyone reading this experienced some version of: pulling your bolt back for the first time on your brand new savage 110 only to hear the brass drop off the bolt face and rattle around on top of the magazine. Take heart, this product will fix it. Right out of the box, my savage 110 tactical would only eject about 1/3 of the time. My suspicions as to why were confirmed by my local gunsmith, who thought the extractor didn’t to a good enough job holding onto the brass. I had him install this kit, and range time today was no longer an embarrassment.

Advantages: My rifle now has flawless extraction and ejection of spent brass.

Disadvantages: You do need to break these parts in. I did it by pushing an empty case into the bolt face by hand until the extractor engaged around 200 times. If you don’t do that, you will get some failure to extract faults, as the extractor will bind a bit until it’s broken in to the bolt properly.

I really like it. I plan on buying 3 more.

Can you put a spot of paint or pen color on your spring. I mixed them up and it took awhile to find your new one.

I really like it. I plan on buying 3 more.

My new savage axis 2 in 6.5 Creedmoor wouldn't eject the cases and I was PO'd. I looked around and found Tacticle works and their replacement extractor and ejector kit. I ordered it and it came pretty fast. It took longer to gather the tools than it did to replace the ejector and extractor. I replaced the ball detent and extractor and it worked great with no failures at all. Then I replaced the ejector and spring and it will send the cases spinning out into the way yonder. Outstanding!!!!!!!

Advantages: Now I don't have to jack my position to turn the rifle on its side to get the round out of the receiver. The guys around me aren't amazed by my language any more.

Disadvantages: Have to be careful when ejecting round so you don't have to be combing the grass and weeds for your brass. Same as all my other rifles.

Excellent product works like a charm thank you very much

Advantages: Does what you said it does made a world of difference

Disadvantages: No disadvantages

Absolutely improved extraction on my Savage Model 10. I can draw the bolt slowly without dropping the casing on the ammo stack.

Advantages: Improved extraction.

Disadvantages: None

Excellent service and product was delivered quickly.

Advantages: Website was easy to navigate.

Disadvantages: none at all for me.

Worked good, fast delivery. Thanks

Great transaction, fast shipping and great instructions for installing the parts.

Advantages: Make rifle work as expected.

Disadvantages: none

Excellent product. Works as advertised you won’t be sorry for ordering this product. I ordered the product at 10 Pm Friday night and Saturday morning I had a tracking number.

Advantages: Easy installation , increased performance. Low price

Disadvantages: None

I purchased a brand new Savage 110 125th Anniversary model chambered in 6.5 Creedmoor. The rifle was beautiful and shot well. However, it would only extract and eject a fired case about 25% of the time. The rest of the time, it would pull the case out of the chamber and loose its grip about halfway through the bolt cycle, leaving the spent cartridge sitting on top of the next round in the magazine.

I purchased this kit and installed the new extractor. Problem solved. I have not yet installed the new ejector, but with the new extractor alone it will now reliably extract and eject 100% of the time.

Savage just needs to buy these extractors from Tactical Works and use them from the factory.

Bottom line: awesome product!

Advantages: Fixes extraction problems

Disadvantages: None. Great product.

This worked great for me.. i've just tested it with fired brass at this point. I used all the parts at first but it didn't work properly, the extractor had a really hard time locking onto the case, so i used the factory extractor, the supplied ejector, and larger ball and it seems like its working great like that.

Advantages: Solves ejection extraction issues, I'm happy.

Disadvantages: I didn't need the included extractor part, but used the ball, the new ejector and ejector spring. It works now! Happy as a clam and great customer service sending me a link for the good installation instructions

I'm sure the Savage extractor kit will work great. What was more impressive was the Tactical Works customer service. My parts were shipped incomplete, and after a call to Tactical Works, they apologized profusely and shipped the remaining parts express with no questions asked. While missing the parts on the first shipment was a bummer, their response was first class! I would definitely do business with them again.

Advantages: Great customer service

First time using Tactical Works and wont be the last

Advantages: Tactical Works carried a product that I have had a hard time finding. They also had very fast processing of my order and got it in the mail.

Disadvantages: NA

Great service!

New savage wouldn’t extract sometimes and wouldn’t eject 90% of the time. Off to google which led me to this kit. Just under 250 rds in and closing the bolt took some force initially but function is all good now.

Advantages: Positive extraction and ejection

Disadvantages: None

I installed 4 of these kits in my Savage model 12's(2 .223's and 2 22-250's) for a recent prairie dog shoot. I had trouble with one rifle but it was caused by the original spring being bent. The only part reused by the way. I replaced the original spring, problem solved. At first there is some stiffness but it works out quickly as the parts wear in. All four rifles were used prior to the ejector kits being installed. The ejection process is pretty strong now even when you open the bolt slowly. Installation is straight forward. The instructions are clear even though it might make it seem hard to do install, it's not. The installation is easy. I highly recommend this kit.

Advantages: Strong ejection

Disadvantages: None