Savage Improved Extractor Ejector Kit

This is the upgrade you need if running a BR case in a Savage platform. Immediately fixed extraction/ejection problems. Took a few rounds to break in and cycle smoothly.

Advantages: Nearly 100% ejection with BR case

Disadvantages: Stronger ejector does scratch brass head.

Good upgrade.

Love the stronger ejector spring and it now throws the casings reliably. But I took the extractor back out because it was so stiff that I couldn't get the bolt to close. I even tried hitting it with a mallet to close. I gave up after fighting it for half an hour and put the stock extractor back in. The bolt closes fine and it now throws the casing better so I call it good enough for govt work.

Advantages: Ejects casings noticeably better.

Disadvantages: Extractor may be extremely tight and it could range from bolt being difficult to close, all the way to won't close even after hitting it with a mallet. I'd skip the extractor upgrade and just do the ejector.

Fixed all issues and everything works great.

Disadvantages: should have had a extractor spring also.

Works great,

Advantages: It is a stronger ejector than factory, which is good

Disadvantages: Watch out for the little bearing flying out

The extractor is great, 10/10 would recommend to a friend, 100% necessary upgrade, I have had 0 cases failing to extract.

The ejector is hit or semi-miss because if you go slooooow the case the will fall off the extractor in the action and you have to dig them out, which was actually the case with the stock ejector all the time... so not really a bad thing. Now, if you pull the bolt back like you’re Ryan Cleckner showing off for a video for NSSF, it flings brass kinda like your favorite scary black assault weapon would.

Going at normal speed seems to be the sweet spot for saving brass and it reliably ejects every time landing within arms reach. It really tosses ‘em.

Advantages: Reliable ejection with normal and fast cycling

Disadvantages: Really slow cycling drops the brass because the ejector is TOO efficient, so your booger hook will be wrestling cases if you’re light-handed with the bolt.

Amazingly nice product. So happy that someone has made the effort to understand the needs of the market and contributing to helping others. No longer do I have the issues of learning the a spent case sitting on the mag. Simple easy fix!! Thanks you!!

These kits are a good upgrade. Savage 110 variants are often not great on ejection

Advantages: These kits improve ejection by hanging on to case heads longer in the cycle & better clearing of ports.
Give them some time to smooth up

Disadvantages: These kits are said to be tricky to assemble, but no more than factory parts.

I purchased 2 of your Savage Extractor/Ejector kits. One for a M10 .308 and the other for a M110 6.5 CM. Both are rifles i shoot in PRS style matches as well as hunting.
The kits improved the mechanical function on both rifles 100%.

Advantages: Better extraction and ejection.

The best upgrade for your savage. It’s especially helpful with shorter cartridges like 300 BLK.

Advantages: Better extraction and ejection

Disadvantages: None

I was growing leary of my extractor not ejecting my .308 cases properly. The Extractor would let go prematurely, dropping the empty case onto the top of the magazine.

Well, this kit is the solution. Extraction and ejection is very positive and the brass gets kicked out clear of the ejection port. With authority. This kit works.

Advantages: Ejection is now completely reliable.

Disadvantages: None.

Very nice item,much better than o.e.m. parts . Easy to follow video instruction,very quick to ship. Well worth the money.

Advantages: Very well made

Disadvantages: none

Easy to install, directions are clear. Works like a dream.

Advantages: Better extraction than the original Savage extractor, works really well.

Disadvantages: If you are using with Aluminum Snap Caps, the extractor will cut through the aluminum.

Completely fixed the problem of spent shells not being fully ejected. I’m very pleased with the results.

I installed this in a Savage I've been shooting for over 20 years. I had the factory extractor parts replaced under warranty, and have replaced them a couple of times since, but it never really helped. The weak extraction has been my only complaint with this rifle. I took it out for the first time after installing this yesterday, and was amazed. I actually like my Savage again! Thanks!

Advantages: Easy to install, works great

I’m sure anyone reading this experienced some version of: pulling your bolt back for the first time on your brand new savage 110 only to hear the brass drop off the bolt face and rattle around on top of the magazine. Take heart, this product will fix it. Right out of the box, my savage 110 tactical would only eject about 1/3 of the time. My suspicions as to why were confirmed by my local gunsmith, who thought the extractor didn’t to a good enough job holding onto the brass. I had him install this kit, and range time today was no longer an embarrassment.

Advantages: My rifle now has flawless extraction and ejection of spent brass.

Disadvantages: You do need to break these parts in. I did it by pushing an empty case into the bolt face by hand until the extractor engaged around 200 times. If you don’t do that, you will get some failure to extract faults, as the extractor will bind a bit until it’s broken in to the bolt properly.

I really like it. I plan on buying 3 more.

Can you put a spot of paint or pen color on your spring. I mixed them up and it took awhile to find your new one.

I really like it. I plan on buying 3 more.

My new savage axis 2 in 6.5 Creedmoor wouldn't eject the cases and I was PO'd. I looked around and found Tacticle works and their replacement extractor and ejector kit. I ordered it and it came pretty fast. It took longer to gather the tools than it did to replace the ejector and extractor. I replaced the ball detent and extractor and it worked great with no failures at all. Then I replaced the ejector and spring and it will send the cases spinning out into the way yonder. Outstanding!!!!!!!

Advantages: Now I don't have to jack my position to turn the rifle on its side to get the round out of the receiver. The guys around me aren't amazed by my language any more.

Disadvantages: Have to be careful when ejecting round so you don't have to be combing the grass and weeds for your brass. Same as all my other rifles.

Excellent product works like a charm thank you very much

Advantages: Does what you said it does made a world of difference

Disadvantages: No disadvantages

Absolutely improved extraction on my Savage Model 10. I can draw the bolt slowly without dropping the casing on the ammo stack.

Advantages: Improved extraction.

Disadvantages: None

Excellent service and product was delivered quickly.

Advantages: Website was easy to navigate.

Disadvantages: none at all for me.

Worked good, fast delivery. Thanks

Great transaction, fast shipping and great instructions for installing the parts.

Advantages: Make rifle work as expected.

Disadvantages: none