Savage Improved Extractor Ejector Kit

Excellent product. Works as advertised you won’t be sorry for ordering this product. I ordered the product at 10 Pm Friday night and Saturday morning I had a tracking number.

Advantages: Easy installation , increased performance. Low price

Disadvantages: None

I purchased a brand new Savage 110 125th Anniversary model chambered in 6.5 Creedmoor. The rifle was beautiful and shot well. However, it would only extract and eject a fired case about 25% of the time. The rest of the time, it would pull the case out of the chamber and loose its grip about halfway through the bolt cycle, leaving the spent cartridge sitting on top of the next round in the magazine.

I purchased this kit and installed the new extractor. Problem solved. I have not yet installed the new ejector, but with the new extractor alone it will now reliably extract and eject 100% of the time.

Savage just needs to buy these extractors from Tactical Works and use them from the factory.

Bottom line: awesome product!

Advantages: Fixes extraction problems

Disadvantages: None. Great product.

This worked great for me.. i've just tested it with fired brass at this point. I used all the parts at first but it didn't work properly, the extractor had a really hard time locking onto the case, so i used the factory extractor, the supplied ejector, and larger ball and it seems like its working great like that.

Advantages: Solves ejection extraction issues, I'm happy.

Disadvantages: I didn't need the included extractor part, but used the ball, the new ejector and ejector spring. It works now! Happy as a clam and great customer service sending me a link for the good installation instructions

I'm sure the Savage extractor kit will work great. What was more impressive was the Tactical Works customer service. My parts were shipped incomplete, and after a call to Tactical Works, they apologized profusely and shipped the remaining parts express with no questions asked. While missing the parts on the first shipment was a bummer, their response was first class! I would definitely do business with them again.

Advantages: Great customer service

The kit really ejects the case much better. However it also made the bolt very hard to close, and the rifle’s accuracy was affected. I ended up taking it out and put the old parts back in.

TW NOTE: Explained to customer that with the new stainless steel parts sometimes after installation the bolt may be difficult to close. To fix this issue place an empty case in and slam the bolt. You may need to really work the bolt ~100 times to get things loosened up then should be good to go.

Advantages: Ejects cases much better.

Disadvantages: Made bolt difficult to close, and negatively affected the rifle’s accuracy.

First time using Tactical Works and wont be the last

Advantages: Tactical Works carried a product that I have had a hard time finding. They also had very fast processing of my order and got it in the mail.

Disadvantages: NA

Great service!

New savage wouldn’t extract sometimes and wouldn’t eject 90% of the time. Off to google which led me to this kit. Just under 250 rds in and closing the bolt took some force initially but function is all good now.

Advantages: Positive extraction and ejection

Disadvantages: None

I installed 4 of these kits in my Savage model 12's(2 .223's and 2 22-250's) for a recent prairie dog shoot. I had trouble with one rifle but it was caused by the original spring being bent. The only part reused by the way. I replaced the original spring, problem solved. At first there is some stiffness but it works out quickly as the parts wear in. All four rifles were used prior to the ejector kits being installed. The ejection process is pretty strong now even when you open the bolt slowly. Installation is straight forward. The instructions are clear even though it might make it seem hard to do install, it's not. The installation is easy. I highly recommend this kit.

Advantages: Strong ejection

Disadvantages: None

Product performed as advertised and wasn't difficult to install

Advantages: Firmly extracts and cleanly ejects spent cases from my rifle.

Disadvantages: Extractor is longer than needed n takes considerable first to close the bolt.
Tho only improvement I can suggest is to make it case specific.

Function is very reliable a great improvement over original. Run about 100 rounds through the action has worked perfectly to date.

Advantages: Easy installation with appropriate tools.

Disadvantages: None so far.

Great product, fixed my extraction issues. Even when running the bolt slow it throws the shell about a foot away. Very easy to install and awesome customer service in the fact that I was sent an email with instructions a day before the kit came so I had a good idea before I even started the install. I would definitely say this is a must have for any Savage rifle.

Advantages: Better extraction and ejection.

Disadvantages: Extractor hasn't worn in yet so the bolt has to be run a little harder to close it since the spring is tight trying to jump over the case rim. But it's to be expected and will get better the more it's used.

Great product. This kit does exactly what it is supposed to and better yet actually made my savage bolt useable. Throw cases plenty far now where as the stock parts left the case laying in the action.

Advantages: Works better than I expected.

Disadvantages: None

Working as advertised
Bolt closes harder now though

Advantages: Extraction and ejection are great

Disadvantages: Hard bolt closing

parts are very well made and instalation was very simple and easy. the only thing that needs to be added to this kit is a new extractor spring to make it the ultimate upgrade kit for the Savage rifle. that is the only reason i gave it 4 stars.

Advantages: more positive case extraction.

Disadvantages: i can seee no disadvantages

This is the most simple worthwhile upgrade to a Savage. They have the absolute worst extractors in the industry and that goes for all models. I have 3 Savage rifles and only one sort of worked right. Good shooters for the money but they really need this upgrade.

Advantages: Reliability at a small cost.

Disadvantages: None

I had a Savage 110 Storm LH in 6.5 Creedmoor only a few months old with less than 100 rounds down the barrel. In testing commercial ammo, I began to experience ejection problems with some brands being worse than others. Ejection with all was weak. This gun had the new Savage extractor style with one corner milled off and a ejector with an angled face. After studying the problem I figured it was most likely the extractor because unfired rounds ejected just fine. It just wouldn't hold the fired casing long enough to be ejected as the bolt moved rearward. I replaced only the extractor and ball with the Tactical works units. Completely solved the problem. Extraction and ejection is robust. Put around 50 rounds downrange since with zero failures. Fired cases will now eject more than 3 feet if I don't catch them.

Although I decided to keep the original Savage ejector, I did experiment with removing it. On the lefty bolt, insertion of the retainer pin is on the opposite side of the ejector. The pin must be almost fully inserted to reach the cutout in the ejector. The only way I could get it done was to use a pin very slightly smaller than 1/16 that could be inserted without force to hold the ejector in place while the factory pin was tapped in from the other side with a punch and hammer.

Advantages: Robust, reliable extraction

Disadvantages: You have to buy the entire kit although you may only need just one part. I would be good to include a new ejector retaining pin which is slightly longer than the Savage original, especially useful for lefty bolts.

Best kit ever. The extractor alone solved my problem. My savage now ejects cases as a football kicker.

Advantages: Amazing

Disadvantages: Nothing.

Recieved the new extractor kit and thus far has an improvement over the factory savage parts. Savage should change up what should be a simple upgrade and fix...very pleased.

Good product, it works perfect

Actually works. I've been shooting my rifle for years without reliable ejection, and just thought it was something I had to live with. Installed this kit and everything functions the way it was intended. Great product worth every penny!

Installing this kit eliminated what I consider the most common and needless problem with Savage bolt action rifles. The case extraction issue. Now, if I had a kit for the Mod 12 bolt I'd have all my issues with Savage set straight.

Advantages: No more "fishing" around for spent cartridges in the chamber.

Disadvantages: I've found NO disadvantages so far

Works as advertised. I changed just the extractor by itself and no real change. The real difference seems to be the ejector. It's squared off on the top, longer, and protrudes much higher than OEM. The replacement spring is longer and provides more oomph. Brass easly slings out where before it kinda just fell out.

Advantages: Works like the factory should have done in the first place.

Disadvantages: Easy to have parts spring out across the room...be careful!

Installed this kit when I had the extractor and ejector out of the bolt. This is a no brainer. Better made than the original parts and the result is improved extraction and ejection. Installs in just a couple of minutes after you figure out how to do it. Installed this with the bolt in a box because I did launch the spring and ball a couple of times till I got it in. A really nice upgrade.

Advantages: Improved extraction and ejection. Better quality than originals.

Disadvantages: None

The spring I received was not the same dimensions as the one previously in bolt. It was way to long and very skinny. I left the old spring in to be able to get detent ball and extractor in place.

Disadvantages: Not sure if extractor ejects spent case as far from gun as expected because of said spring.