Good weight and fit.

This worked great for me.. i've just tested it with fired brass at this point. I used all the parts at first but it didn't work properly, the extractor had a really hard time locking onto the case, so i used the factory extractor, the supplied ejector, and larger ball and it seems like its working great like that.

Advantages: Solves ejection extraction issues, I'm happy.

Disadvantages: I didn't need the included extractor part, but used the ball, the new ejector and ejector spring. It works now! Happy as a clam and great customer service sending me a link for the good installation instructions

Outstanding addition to my Howa 1500. The short bolt handle and small bolt knob on the stock rifle made it a little awkward to operate the bolt, especially while wearing gloves. There just wasn't much to grab, and your thumb knocked against the scope when you opened the bolt. But now there's plenty of room for a comfortable and ergonomic grip on the bolt knob with some daylight between your thumb and the scope when you open the bolt. It's an absolute must for any tactical application.

It comes with two small rubber washers to grip the bolt head more firmly, but I found it actually clamps tighter and works better with just one.

Advantages: Easy to install. Inexpensive. Well-built. Very functional.

Disadvantages: The edges of the screw holes are a bit sharp, and can even bite into your finger during operation if you grip at the wrong angle.

I purchased a brand new Savage 110 125th Anniversary model chambered in 6.5 Creedmoor. The rifle was beautiful and shot well. However, it would only extract and eject a fired case about 25% of the time. The rest of the time, it would pull the case out of the chamber and loose its grip about halfway through the bolt cycle, leaving the spent cartridge sitting on top of the next round in the magazine.

I purchased this kit and installed the new extractor. Problem solved. I have not yet installed the new ejector, but with the new extractor alone it will now reliably extract and eject 100% of the time.

Savage just needs to buy these extractors from Tactical Works and use them from the factory.

Bottom line: awesome product!

Advantages: Fixes extraction problems

Disadvantages: None. Great product.

Good looking knob, easy install, only used one O-ring. Don't be an idiot like me and not realize there are two lengths of screws for the three holes, and punch the long one right through the handle because you put it in a short hole. Cleaned up well, still looks good.

Advantages: Easier, heavier throw.

Disadvantages: Was not idiot proof enough for me to install correctly in the dark while watching TV.

Simple, inexpensive and it looks great! Like Bryan said, the included O rings don't fit all that well. I used a very small patch of balloon rubber on one side of the knob and everything clamped up tightly.

Don't hesitate to order from Tactical Works. Lisa and the gang will take good care of you!

The tactical blanket for the acc chassis is awesome. The mdt acc material for the cheek pad is so hard that during positional movements my cheek bone started to hurt from moving quickly.

Advantages: More comfortable to shoot from. Looks good. It’s warm to rest my cheek on now with this new blanket.

Disadvantages: The sticky tape is good but it peels from the corners. I have a feeling Once I do a match I might get dirt and the pad won’t stick the same way ever again. Might super glue it to the cheek riser.

The GRS Bifrost stock is a recent purchase. I looked at many stock manufacturers and gave GRS a hard look. I installed the Bifrost on a Savage 111 LRH in a right hand, long action, detachable mag, and bottom bolt release configuration in 6.5/284 Norma . Installation was very simple and utilized hardware, mag, trigger guard, and base plate from the Savage stock. I was extremely pleased with the stock and customer service @ Tactical Works, INC is Top Notch. I am glad I had the opportunity to do business with them and will spread the word...

Advantages: Ease of install. Fitment was perfect. Adjustment of LOP and cheek weld was unmatched.

Disadvantages: Not getting one sooner...

Great product. Makes loading the next round much easier.

Advantages: Makes shooting much better for people with large hands.

Disadvantages: None

the rubber o-rings were too big for my application. The sides would not come together completely. I use 5 minute epoxy instead. Once dry the bolt handle looked like it was a single part of the bolt

Bought this stock pack for my M40A1 built by Raven Rifles, the cheek pad gave me the proper cheek height so that I could get the proper cheek weld with the MST 100 scope. The cheek pad is well constructed and the customer service is great along with the fast shipping . Harry V

Top shelf product

Advantages: Better leverage without tearing up my hand.

Disadvantages: None

Great stock, very strong and the magpul bottom fit right in.

Advantages: No flex at all

Disadvantages: It’s heavy but your not hiking all day with this

Easy install, nice fit and finish. I put this on a Howa mini and only used 1 of the supplied O rings. I did put a dab of blue loctite on each screw and let it dry before tightening it down. No wiggle no wobble. I’m happy with the purchase and would buy again.

Advantages: Adds speed, indexing and leverage to quickly open the bolt from standing, kneeling and prone. One of the only truly bolt on’s for a Howa bolt.

Disadvantages: None as of yet

Great transaction, fast shipping and great instructions for installing the parts.

Advantages: Make rifle work as expected.

Disadvantages: none

I bought this for my Precision Rifle cause the the pad was on the face cheek.
It made a difference when aiming the rifle.

Advantages: Something soft on the cheek, instead of hard plastic.

Seriously? These cheek rests are perfect. They can be used to dramatically improve proper cheek weld on everything from a 10/22 to a custom HS Precision stock. I add small amounts of foam padding underneath the rest for more precise alignment. The comfort and low cost solution for improving accuracy is unparalleled. The soft suede does crackle and wear over four or five years but doesn’t stop it from functioning. And it’s the easiest way to make even a cheap plastic stocked savage bolt action shoot better and look great. No it’s not as good as my accuracy international or masterpiece arms stocks. But for $40?? You will be very impressed.

Excellent product. Works as advertised you won’t be sorry for ordering this product. I ordered the product at 10 Pm Friday night and Saturday morning I had a tracking number.

Advantages: Easy installation , increased performance. Low price

Disadvantages: None

Excellent service and product was delivered quickly.

Advantages: Website was easy to navigate.

Disadvantages: none at all for me.

Fit pretty good had to remove a little from the stock for it to close completely. Also quite heavy, I will probably take it to the shop and mill the center out to reduce some weight

Excellent product. Fit my Howa 1500 perfect. Mounted up in a short time, went to the range and shot several sob moa groups. Couldn't be happier.

I'm impressed with the quality and fit. An excellent choice to replace flimsy cheap factory stock. Stock is rigid and looks great. Very happy with what I received.

Advantages: I like the full aluminum bed feature and the sliding bi-pod rail.

Disadvantages: I had to buy a different length action screw and bottom piece for the box magazine. Both were readily available and no big deal.

Worked good, fast delivery. Thanks

Better than expected. Fits perfect into my MDT-LSS-XL chassis.

Advantages: Like the plastic of the metal one I have. Well constructed feed & spring build.

Disadvantages: None

Absolutely improved extraction on my Savage Model 10. I can draw the bolt slowly without dropping the casing on the ammo stack.

Advantages: Improved extraction.

Disadvantages: None