Designed to fit your favorite Ruger 10/22 for that dream build you've always wanted. Featuring the same great ergos as the standard Bravo but with a slightly shorter minimal LOP (~11.25") for shooters of all sizes. For those of you over-thinkers out there, don't worry, the cheekpiece position is still the same as the standard Bravo.
The Bravo is on of the most comfortable stocks available but that's just the beginning. The full length stiff aluminum backbone will not allow the forend to flex on you but does allow design modularity with loads of accessories like the popular Spigot Mount and ARCA rail system.
The ergonomic adjustments are just what you need to fit your frame so you can pull off the difficult shots. Comes standard with too-less cheek height and a spacer LOP system.
Bravo Chassis Forend:
- Polymer for light weight and to eliminate heat transfer to/from the shooters hand
- Mounting holes at various positions will take L2 Picatinny rails, Barrier stop, ARCA Rail etc.
- MLOK slots in sides and bottom of forend for universal accessories mounting
Backbone:
- Full length aluminum backbone from the action to the tip of the forend
- Accepts the Whiskey-3 gen3+ Spigot Mount, but current Spigot mounts will not fit the 10/22 with bull barrel
- Will accept barrel contours up to 0.920" in diameter
Cheekpiece:
- Infinitely adjustable within range (~1" travel)
- Can be quickly removed and re-installed, uses a clamp and thumbscrew design
- Made of polymer to limit heat transfer to or away from your face
Length of Pull (LOP):
- Ships standard 0.75" LOP spacer
- Standard 3/8" LOP spacers can be added (available separately) for longer LOP
Buttstock:
- Very strong reinforced polymer material
- Mounting points for external QD cup
- Built-in thumbshelf for same-side-thumb-grip shooters
- Can be configured with a continuous angled lower surface or a butthook configuration (hook style cover available separately)
- Current Bravo Tool-less LOP and Bravo Flat Bag Rider will NOT fit 10/22 Bravo due to shorter stock
Recoil Pad:
- KRG designed injection molded pad that is thin for short LOP
- Standard logo'd KRG buttpad is compatible
Mounting features for sling, monopod, etc:
- Forend has M-LOK slots on each side and bottom along with other holes for mounting KRG accessories
- Buttstock has one position on each side for external QD cup (1 included)
- Buttstock includes angled cover with the Butthook cover sold separately
- Harris bipod stud included on forend
- Spigot Mount can be added to front of chassis, but current Spigot Mounts will not fit the 10/22 with a bull barrel.
- Ambi QD sling plate can be mounted and provides 3 positions for QD sling
Materials/Finishes:
- Aluminum parts are hard anodized (Type III)
- Nearly all fasteners are stainless steel, some with black oxide coating, some are without
- Steel parts are salt bath nitrided or stainless steel
- Forend and buttstock are injection molded reinforced polymer
Weight: 2.4 lbs without magazine
Compatibility:
- Compatible with Factory Ruger 10/22 as well as 10/22 receivers from Brownells, Bergara, Tactical Solutions, Volquartsen, and KIDD "Classic Slip-Fit" (with or without rear tang screw).
- NOT compatible with take-down models
- Utilizes 10/22 factory mags
- Current Spigot Mounts don't fit the 10/22 with bull barrel